• fully welded
• bucket approx 2in tall
• approx 16mm diameter inside the bucket
• 90 degrees
• works like a terp slurper with a marble on top

• available in 10mm male and 14mm male
• approx 16mm diameter inner bucket
• works best with marble and pearls NOT pillars or valve marbles

• approx 15 cm inside bucket diameter
• works with most slurper sets including mini slurper sets such as the "Money Bags" by JAG
• extended for larger pillars
• marbles/pearls not included

• by artist Helraiser glass
• approx 22mm large marble
• approx 12mm guard marble
• approx 20mm x 6.5mm

• By Jason Walker Glass
• marble approx 24mm
• pillar approx 19mm x 7mm
• valve marble approx 12mm

• by 710 heady bangers
• set includes bubble gum banger and marble set
• 3 sets to choose from, bat pearl set, red pearl set, and blue pillar set

• by Maven
• approx 6in tall
• butane gas lighter
• safety lock
• adjust flame

• by Razer Quartz
• fully welded
• bucket approx 2in tall
• approx 15mm diameter inside the bucket
• 90 degrees
• works like a terp slurper with a marble on top

• works with terp slurpers for spinning function
• screw apporx  30mm long
• marble approx 22mm in diameter

FULL FEATURE LIST

Solid Zinc Alloy

Reliable Piezo push button igniter

Adjustable flame control

Sturdy base

MAX 2500+ degree F

High Heat Resistance

DIMENSIONS

Weight: 1lb

Length: 5.7in

Width: 3.4in

Height: 6.6in

INDUSTRIAL GRADE

    Sleek, reliable, simple, durable, versatile, this tool really sits apart from other torches. Made entirely of Zinc Alloy for the best balance of affordability, strength, and both heat and corrosion resistance. The Dragun is a loyal and enduring workhorse. SOLID METAL this torch has a nice heavy feel, very distinct you'll feel the quality as soon as you hold it. Holds fuel to burn 30+ minutes depending on the setting. A twist knob allows the user to adjust the flame's intensity to temperatures in excess of 2500 degrees F.

NOTE: The highest setting is very powerful but uses the most gas.

SAFE

    It won't break easily or fall apart - you won’t keep buying torches - safety concerns are dropped to a minimum. With ceramic incorporated into the nozzle tip plus the heat dissipating properties of our Zinc Alloy, the torch head and body stays at a safe temperature during prolonged use. Comes with a sturdy base which is wide so it wont easily be tipped over.

VERSATILE

    For your dab shrine, restaurant, kitchen, shop, workplace, art studio, cigars, boating, camping, etc..

Dragun's PROMISE

There's confidence in quality. Manufacturer warranty for a year after purchase. Contact us with any inquiries, you will be responded to timely. We genuinely want you to be satisfied with your Dragun. We know you will be.

Making Draguns... The first of a coming line in compressed gas blowtorches. This company was established during the hardships of 2020 in Southern California to prove that if determined and active, success is always around the corner. Dragun Torches is on a mission to lead this industry with the best quality, most durable, torches. Support local business and support the people.

• by artist Captain Glass
• approx 6mm 
• made with crushed opal
• available in multiple colors

• By artist Captain Glass
• channel auto spinner caps
• available in multiple designs
• place atop a banger with pearl for spin function !

• by artist Mente glass
• Marble approx 29mm , guard marble approx 14mm, pillar approx 21mm X 6mm

• By artist Jason Walker Glass
• sets come with marble, pillar, and guard marble
• marble approx 24mm
• guard marble approx 11mm
• pillar approx 18mm x 7mm

• Collab between Absnt Minded , Role models , and Bear quartz
• 3 variations : "Absnt Minded"  ,"¿ " logo  and  "?"  logo
• 10mm male and 14mm available

• Ignite Quartz drilled holed banger
• approx 20mm inner bucket diameter
• 90 degrees
• 10mm male and 14mm male
• drilled holes on side of bucket so you can drop your dab in the bucket or use the holes to dab from outside the bucket
• can be used with terp marbles works like a terp slurper

• approx 15.7cm inside bucket diameter
• works with most slurper sets including mini slurper sets such as the "Money Bags" by JAGB
• extended for larger pillars
• marbles/pearls not included

• by artist Captain Glass
• terp slurper sets include large marble approx 22mm, guard marble approx  14mm, pillar approx 22mm X 7mm, and pearl approx 7mm
• available in multiple colors

• BANGERS NOT INCLUDED**
• 10'' and 3'' long
• available in 4 slots and single slot holder
• by Glob Mob 
• 3d printed
• fits 10mm/14mm 

• Ignite Quartz banger
• frosted and etched mazes
• 90 degrees
• approx 20mm inner bucket diameter
• 14mm male

• SWABS NOT INCLUDED**
  
• by Glob Mob 
• oil drum design
• storage for swabs
• 3d printed
• 3'' tall

Tired of loose q-tips cluttering your space? Keep your dab station clean and organized with the Oil-Drum Q-Tip Holder by Glob Mob! The size of the cavity was purposely designed to fit all q-tips in an organized manner! Check out all the different colors to match the rest of your setup! The Qtip Holder is just one component of the Glob Mob starter kit, check out our Single Dabber Stand, and Silicone Carb Cap Stand for the rest!

*PRODUCT DISCLAIMER*
To maintain best the best quality for the longest time, make sure to:
– Keep products out of direct sunlight
-Use a clean paper towel with isopropyl alcohol to clean the product when dirty.

• CAPS/DABBERS NOT INCLUDED***
• By Glob Mob
• 3d printed
• 3 carb cap slots
• 2 place holders for dabbers
• made in the usa
• 6'' long

        A MESSAGE FROM GLOB MOB

Introducing the Triple-Double Mini Combo Station. This combo station will hold up to two dabbers and three carb caps. The carb cap holders are lined with a silicone ring to protect against heat and sticking! There is also a silicone drip pad at the bottom of the holder to make clean up easy! Any carb cap greater than 23mm will fit.

The combo station also comes equipped with two holders for glass or plastic dabbers. The distance between the two posts is about 1.3″ (40mm exactly)

If you have any concerns about your cap or dabber fitting, just send us a message!

Over 2 and a half years of experience with 3D printing have allowed me to dial in the settings on my printer to an absolutely perfect level. No visual flaws or defects here. The professional quality of our prints is bound to impress you and open your mind to the world of 3D printing.

While bringing new innovations to the world is a passion of ours, so is helping the environment. This carb cap stand is manufactured using a corn-based bio-plastic known as PLA (Poly Lactic Acid). PLA is not only a renewable resource, but its also “100% BIODEGRADABLE” which is something that almost no other plastics out there can say. So by buying our products, you can call yourself a proud supporter of a green company.

Carb Caps and Dabbers are not included!!!

*PRODUCT DISCLAIMER*
To maintain best the best quality for the longest time make sure to:
– Keep products out of direct sunlight
– Try and avoid storing in temperatures above 85 Degrees
– Do not pull on silicon pieces
-Use a clean paper towel with isopropyl alcohol to clean product when dirty.

CLEANING INSTRUCTIONS
– The Silicone Carb Cap Holder is safe to clean with rubbing alcohol, but don’t soak it for extended periods of time or it will affect the color.



• CAPS/BANGERS NOT INCLUDED**
• by Glob Mob
• 6'' and 3'' long
• available in triple on single slots
• 3d printed

A MESSAGE FROM GLOB MOB

NEW DESIGN FITS UP TO 3 CAPS 23mm OR GREATER!!! The silicone ring at the top flawlessly supports most carb caps! The holder also has a silicone drip pad to help make the cleaning process a little easier. Any carb cap greater than 23mm will fit!

DIMENSIONS / SIZE
– The base is about 7.25″/184mm in width
– The height of holder is about 1″ /27mm
– The inside of diameter of the silicone ring is 23mm
– The base is about 70mm/2.75″ in depth
– ANY CARB CAP GREATER THAN 23mm WILL FIT!!!

*PRODUCT DISCLAIMER*
-Carp caps are not included in purchase
To maintain best the best quality for the longest time make sure to:
– Keep products out of direct sunlight
– Try and avoid storing in temperatures above 85 Degrees
– Do not pull on silicon pieces
-Use a clean paper towel with isopropyl alcohol to clean product when dirty.

CLEANING INSTRUCTIONS
– The Silicone Carb Cap Holder is safe to clean with rubbing alcohol, but don’t soak it for extended periods of time or it will affect the color.