• BANGERS NOT INCLUDED**
• 10'' and 3'' long
• available in 4 slots and single slot holder
• by Glob Mob 
• 3d printed
• fits 10mm/14mm 

• CAPS/BANGERS NOT INCLUDED**
• By Glob Mob 
• 3d printed
• Mega Dab station 
• 3 carb cap slots
• 2 dabber slots
• 2  10mm/14mm banger slots
• Cotton swab station
• Trash can/soaker slot

• A MESSAGE FROM GLOB MOB....

The Mega Combo Dab Station by Glob Mob, our most elite dab station, provides every amenity ever needed by dabbers alike! Storage for the most frequently used dab accessories are placed at the front of the station. There you will find two holders for dab tools and three spaces for carb caps. You’ll also see the reason our dab stations are the best money can buy! Look at every other dab station on the market, and you’ll see cheap products designed for setting warm and sticky carb caps on plastic! That has to be the absolute worst way to store your expensive glass! Instead, we line silicone rings into our carb cap holders to effectively combat the heat of a freshly used cap. Silicone-lined carb cap stands are the easiest to clean, will prevent caps from sticking, but most importantly, it’s the safest material you can use!

At the rear of the dab station, you’ll find two silicone lined 14mm slots made for bangers, slides, and joints! (Two 10mm adapters are included!)  Inbetween the banger stands, we have a cotton swab storage area plus a removable silicone lined trashcan!

One of the best features of the Mega Combo Dab Station is how customizable the colors and amenities are. We designed our stations to compliment and match all the pieces of your setup correctly. To accomplish that, we offer 200+ two-tone color combinations, but it doesn’t stop there! Shoot us a message, and we’ll help you customize the color for every piece of the station! The best part is, we will do it at no extra cost! If you’d like to customize your Mega Combo Station storage features, grab a Floating Carb Cap Adapter to swap a banger slot for extra carb cap space!

*PRODUCT DISCLAIMER*
To maintain best the best quality for the longest time, make sure to:
– Keep products out of direct sunlight
– Try and avoid storing in temperatures above 85 Degrees
– Do not pull on silicon pieces
-Use a clean paper towel with isopropyl alcohol to clean the product when dirty.

• CAPS/BANGERS NOT INCLUDED**
• by Glob Mob
• 6'' and 3'' long
• available in triple on single slots
• 3d printed

A MESSAGE FROM GLOB MOB

NEW DESIGN FITS UP TO 3 CAPS 23mm OR GREATER!!! The silicone ring at the top flawlessly supports most carb caps! The holder also has a silicone drip pad to help make the cleaning process a little easier. Any carb cap greater than 23mm will fit!

DIMENSIONS / SIZE
– The base is about 7.25″/184mm in width
– The height of holder is about 1″ /27mm
– The inside of diameter of the silicone ring is 23mm
– The base is about 70mm/2.75″ in depth
– ANY CARB CAP GREATER THAN 23mm WILL FIT!!!

*PRODUCT DISCLAIMER*
-Carp caps are not included in purchase
To maintain best the best quality for the longest time make sure to:
– Keep products out of direct sunlight
– Try and avoid storing in temperatures above 85 Degrees
– Do not pull on silicon pieces
-Use a clean paper towel with isopropyl alcohol to clean product when dirty.

CLEANING INSTRUCTIONS
– The Silicone Carb Cap Holder is safe to clean with rubbing alcohol, but don’t soak it for extended periods of time or it will affect the color.

• SWABS NOT INCLUDED**
  
• by Glob Mob 
• oil drum design
• storage for swabs
• 3d printed
• 3'' tall

Tired of loose q-tips cluttering your space? Keep your dab station clean and organized with the Oil-Drum Q-Tip Holder by Glob Mob! The size of the cavity was purposely designed to fit all q-tips in an organized manner! Check out all the different colors to match the rest of your setup! The Qtip Holder is just one component of the Glob Mob starter kit, check out our Single Dabber Stand, and Silicone Carb Cap Stand for the rest!

*PRODUCT DISCLAIMER*
To maintain best the best quality for the longest time, make sure to:
– Keep products out of direct sunlight
-Use a clean paper towel with isopropyl alcohol to clean the product when dirty.

• CAPS/DABBERS NOT INCLUDED***
• By Glob Mob
• 3d printed
• 3 carb cap slots
• 2 place holders for dabbers
• made in the usa
• 6'' long

        A MESSAGE FROM GLOB MOB

Introducing the Triple-Double Mini Combo Station. This combo station will hold up to two dabbers and three carb caps. The carb cap holders are lined with a silicone ring to protect against heat and sticking! There is also a silicone drip pad at the bottom of the holder to make clean up easy! Any carb cap greater than 23mm will fit.

The combo station also comes equipped with two holders for glass or plastic dabbers. The distance between the two posts is about 1.3″ (40mm exactly)

If you have any concerns about your cap or dabber fitting, just send us a message!

Over 2 and a half years of experience with 3D printing have allowed me to dial in the settings on my printer to an absolutely perfect level. No visual flaws or defects here. The professional quality of our prints is bound to impress you and open your mind to the world of 3D printing.

While bringing new innovations to the world is a passion of ours, so is helping the environment. This carb cap stand is manufactured using a corn-based bio-plastic known as PLA (Poly Lactic Acid). PLA is not only a renewable resource, but its also “100% BIODEGRADABLE” which is something that almost no other plastics out there can say. So by buying our products, you can call yourself a proud supporter of a green company.

Carb Caps and Dabbers are not included!!!

*PRODUCT DISCLAIMER*
To maintain best the best quality for the longest time make sure to:
– Keep products out of direct sunlight
– Try and avoid storing in temperatures above 85 Degrees
– Do not pull on silicon pieces
-Use a clean paper towel with isopropyl alcohol to clean product when dirty.

CLEANING INSTRUCTIONS
– The Silicone Carb Cap Holder is safe to clean with rubbing alcohol, but don’t soak it for extended periods of time or it will affect the color.



• By the Amazing team Dawghouse X Modified Creations glass that brought you the amazing NSOD heads we carry!
• mats are 8'' X 6'' X 6"

• A nice silicone mat to set your glass piece upon
• Helps to keep from scratches or banging your piece
• 11" x 7" Medium size

• Protective mats to set your glass pieces upon
• Smoking turtle print

• protective mats to set your pieces upon
• dank wars print

• Glass mat to set your glass pieces upon
• Wrestling print
• 16''x 12''

• Dab inc quality brand
• 14"x11"
• silicone dab mat

• Fogg u up quality brand
• 8x8
• green silicone dab mat