Revolutionary Magnetic Quartz Atomizer with built-in temperature sensor
Quick Connect Adapter with airflow release
Straight quartz to glass vapor pathway
Enhanced ergonomics with grip pads
Five RGB light modes plus Stealth Mode for discreet dabbing
Exceptional battery life with built-in protection against over voltage and short circuits
Up to 60 hits on a single charge
20 or 40 second hold time
Pass through USB-C charging
Auto shutoff after 15 minutes
Durable and protective carrying case included
1 Year Warranty
Boost EVO Dimensions:
Height: 4" (without glass), 7.75" (with glass)
Dr. Dabber Boost EVO
Boost EVO Quartz Atomizer
Boost EVO Glass Attachment
Boost EVO USB-C Charger
Boost EVO Quick Connect Adapter
Boost EVO Loading Tool
The Dr. Dabber Boost EVO has been painstakingly built from the ground up, incorporating proprietary technology, with one goal in mind: the perfect dab. Achieving the perfect dab every single time you use your vaporizer is a metric that is often overlooked, but most vaporizers on the market have little or no temperature control, calibrated to continuously heat up until a certain point in time when it cuts off. This leads to a ridiculous variance in the temperature you are dabbing at, which doesn’t make sense to us. The Boost EVO has a patent pending temperature control sensor built in, unlike anything else on the market. This means that when you are dialed in, you are DIALED IN. With six heat settings that have been calibrated with the help of customer feedback from tens of thousands of Boost users, you can rely on your Boost EVO to be consistent every single time.
Pair that technology with a custom quartz dish, interchangeable glass, spectacular RGB ambient lighting and surprisingly long battery life for such a portable device, the Dr. Dabber Boost EVO is truly the next generation of the eRig. Available in two colors - Moon White & Eclipse Black.
Huni Badger nectar collector
*BATTERY NOT INCLUDED *
The HUNI BADGER’s portable design makes it easy for you to vaporize your favorite herbal extracts anytime, anywhere. It is powered by a single rechargeable 18650 Lithium-Ion battery paired with a one-button control: Press 5 times to turn on and the square LED indicator glows white. Once the device is turned on, the ceramic tube heating element warms up to operating temperature in merely ten seconds. After it's heated up, you’re ready to make contact with your favorite extracts to produce dense and flavorful vapor clouds. As a safety feature, the device will automatically shut off after 60 seconds of use. Also included within the magnetic cover is a removable glass container we call the HuniPot. You can used it to conveniently store and use your extracts. The included 14mm and EGO adapters works directly as mouthpieces, or can be attached to optional bubblers for water filtration if desired.
Waterproof Hard Case
Huni Badger Unit
High Temp HuniTip (installed)
Low Temp HuniTip
510 eGo Adapter
3 x HuniPot Extract Containers (One stored in magnetic cap)
3 x Pipe Cleaners
2 x Replacement O-rings
(Adapters double as a mouthpiece or can be used for water filtration attachments)
*Requires an 18650 battery, 20A or above recommended for best performance (NOT included with kit)
Pull off magnetic battery cover on the side of the Huni Badger to install an 18650 battery with the positive (+) and negative (-) connections matching the markings on the inside.
Pull open the magnetic cap on the bottom of the device to reveal the mouthpiece stored within the same compartment as the HuniTip heating element.
Slide open the dust cover on top of the device to expose the threaded airway.
Thread in the mouthpiece clockwise until snug.
Prepare your extracts for use.
Press the power button 5 times to turn on the Huni Badger. The logo on the button will glow, the LED light turns on, and the HuniTip begins to heat up immediately.
The Huni Badger reaches operating temperature in roughly 10 seconds. CAUTION: HOT! NEVER TOUCH THE HUNITIP BEFORE IT HAS COOLED DOWN.
Inhale gently through the mouthpiece while dabbing the HuniTip directly onto your extracts.
Note: The device will automatically turn off after 60 seconds as a safety feature. To continue use, press the power button 5 times and the device will be ready to go again.
Make sure device is turned off. (LED and power button light should both be off)
Unscrew the mouthpiece and shut the dust cover.
Replace mouthpiece and HuniPot back within their compartments in the magnetic cap.
Insert HuniTip into the mouthpiece compartment and secure magnetic cap.
Kraken Puffco Peak/Pro attachments by Cooper glass
Kraken and Octo Skull Puffco Peak and Pro attachments
Made by artist Cooper glass
Approx 6'' tall
Beautiful heady design with amazing sculpted tentacles and eyeballs
Mathematix glass brand
works with both the Puffco Peak and Peak Pro
Groovy tube theme design
approx 5.5'' tall
Istoked x-fit vaporizer
4" Tall Istoked vaporizer
comes with charging cable
comes with 1 tank/atomizer
great for on the go with refillable tank
for use with your favorite liquid concentrates
BMAX 3 slot battery charger
compatible with 10440 14500 16340 16650 14650 18500 18650 and 26650 model batteries
doubles as battery pack
input voltage DC 5V 1-2A
output voltage DC 4.2V 1000mA
Imren 18650 3.7 V battery (can use with Huni Badger)
18650 3.7 V 3200mah battery max 40A
can use with Huni Badger
Octo Skull Puffco Peak/Pro attachments Cooper Glass
by artist Cooper Glass
approx 5 in tall
works with both Puffco Peak and Pro
Puffco Peak Atomizer
Genuine Puffco Peak Atomizer
Bud tank vaporizer
Bud tank vaporizer comes with 2 atomizers/ tanks
Comes with charging cable
A great hitting vaporizer to use with your favorite liquid concentrates
Puffco Peak Pro chamber
Puffco peak pro offcial chamber atomizer replacement
The Peak Pro chamber is the engine for the entire device. A unique sensor embedded inside of the chamber communicates with your Peak Pro, keeping your temperature exactly where it needs to be - regardless of how hard you inhale or how much oil you put in.
The end result is the most consistent and controlled dab experience ever.
Puffco travel attachment
Official Puffco travel attachment
Never spill when traveling or on the go
Works with both Peak and Peak Pro
THE PUFFCO TRAVEL GLASS
WORKS FOR PEAK AND PEAK PRO!
The Puffco Travel Glass is back and adds a new depth to both the Peak and Peak Pro experience. Our patent-pending design lets you lock in water just by twisting the mouthpiece. This keeps your device ready to use at all times without the need to fill.
*Never fill your glass when attached to the base **Never disassemble the mouthpiece, turn to open position when cleaning, do not remove ***Before storage or travel when in closed/locked position, flip your travel glass upside down to ensure no water comes out. Water damage to the base is not covered under warranty.